DRAKE ESR-D103 Instruções de Operação Página 71

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 80
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 70
There is no power , See if the power cord became unplugged.
, Check for a blown fuse or circuit breaker or a power outage,
There is no picture , The antenna could be disconnected.
or sound . The input mode could be set improperly. See page 50.
, The tuner (Auto Tuner Setup) could be set improperly. See page 33.
, The TV station may be having difficuifies, Check to see if other stations are working
Remote control is not , Check to see that the batteries are sUII working and propedy installed,
operating properly or , Make sure the remote has a clear sight path to the TV.
at all . Check that the TV/CATV switch is in the proper position,
, You may be too far from the TV You must be within 23 feet (7 meters),
You cannot select a , Make sure the channels have been programmed. See '*Channel Summary", page 34,
certain channel , Check to see if the channel is locked See "Channel Summary - Lock" page 35,
The power turns off , Make sure the set did not become unpk*gged.
by itself . Perhaps the On/Off Timer is set. See page 57.
, Check to see if the Sleep "nmer was set, See page 61,
The clock is wrong . The power was interrupted and the clock was not reset, See page 56,
The color quality , "lint and Color may be improperly adiusted. See page 53.
is poor , The Video Status mode may be turned to the wrong setting. See page 67
There are lines . There could be interference from another electrical appliance, such as a computer,
across the picture another TV or VCR, Move any such appliances further away from the TV
The picture is spoiled . There could be interference from a highwvattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference,
There are double , A building or passing airplane can reflect the odginal signal and produce a second,
pictures (ghosts) slightly delayed one Adjust your antenna position,
Picture is snowy . Your antenna may be damaged, disconnected or turned, Check the antenna
(image noise) connection, If the antenna is damaged, replace it.
Screen is 40% black , The Closed Caption Text mode is on, Turn it off in the Closed Caption Menu, page 46,
Stereo or bilingual . Make sure the MTS settings are correct. See page 61,
programs can't be
heard
Static electricity . it is normal to feel static electddty if you brush or touch the screen,
You hear occasional , it is normal for the TV to make crackling sounds when first turned on or off Unless
crackling sounds the sound or picture become abnormal, this is fine.
The square appears , it appears when you are operating the Auto Convergence. if not, then this may
and blinking be a problem with the Auto Convergence, Contact a service agent.
it does not operate , Press the CHANNEL- and VOLUME- buttons on the front panel of the TV simultaneously
correctly for a few seconds. The Digital Tuner will be reset, if this does not reset it correctly, unplug
the power cord and plug it back in,
m
Vista de página 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 79 80

Comentários a estes Manuais

Sem comentários