DRAKE ESR-D103 Manual de Instruções descarregar pdf (Página 89)

100

There is no power

• Check for a blown fuse or circuit breaker or a power outage.

• It is possible the fan is stuck or the inside temperature is rising abnormally

Consult your dealer.

The POWLR LED • It may be a malfunction that the fan is locked or the temperature has increased

and LAMP/PROGRAM

LED are blinking

alternately

The POWER LED • The lamp may not have been installed correctly, or it may be due to a malfunction

and LAMP/PROGRAM • The lamp door may not be closed correctly

LED are blinking

rapidly simultaneously

There is no picture • The antenna could be disconnected.

or sound • The input mode could be set improperly. See page 69.

• The tuner (Auto Tuner Setup) could be set improperly. See page 40.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not • Check to see that the batteries are still working and properly installed

operating properly or • Make sure the remote has a clear sight path to the TM

at all • Check that the TV/CATV switch is in the proper position.

• You may be too far from the TV You must be within 23 feet (7 meters).

You cannot select a • Make sure the channels have been programmed. See "Channel Summary", page 41

certain channel • Check to see if the channel is locked See "Channel Summary - Lock" page 42

The power turns off • Make sure the set did not become unplugged.

by itself • Perhaps the On/Off Timer is set. See page 65

• Check to see if the Sleep Timer was set See page 72

It does not operate • This television is operated by a microprocessor. It is possible that external noise or

correctly interference is causing the problem. If the television does not function correctly, remove the

electrical plug from the wall outlet and wait a while before inserting it into the wall outlet

again and operating the television.

The clock is wrong * The power was interrupted and the clock was not reset See page 64

The color quality * 31nt and Color may be improperly adjusted. See page 60.

is poor * The Video Status mode may be turned to the wrong setting. See page 71.

There are lines * There could be interference from another electrical appliance, such as a computer,

across the picture arlother TV or VCR Move arly such appliances further away from the TV

The picture is spotted * There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

operating nearby. Move the antenna away from the appliance or change to a coaxial

cable connection which is less prone to interference

There are double * A building or passing airplane can reflect the original signal and produce a second,

pictures (ghosts) slightly delayed one Adiust your antenna position

Picture is snowy * Your antenna may be damaged, disconnected or turned Check the antenna

(image noise) connection If the antenna is damaged, replace it

Screen is 80% black * The Closed Caption Text mode is on Turn it off in the Closed Caption Menu, page 51

Stereo or bilingual * Make sure the MTS settings are correct See page 72

programs can't be

heard

The LAMP/PROGRAM • It may be a malfunction of the internal electrical circuits

LED continues blinking

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 99 100

Comentários a estes Manuais

Sem comentários

DRAKE ESR-D103 Manual de Instruções Página 89

Comentários a estes Manuais